CAST STEEL GATE, GLOBE AND CHECK VALVES.
Design Standards:API 600, API 6D, ASME B16.34, API 603
Materail Grades:WCA, WCB, WCC LCB, LCC, WC1, WC5, WC6, WC9, LC2, LC3 C5, C12, C12A, CF8, CF8M, CF8C, CF10, CG8M, CE8MN, CD6MN, CD3MN, Monel M30C, Monel M35-1, Monel CZ100, Inconel CY40
(Inconel 600), CW2M (Hastelloy C4), N12MV (Hastelloy B), CW12MW (Former
Hastelloy C-276), CW6M (New Hastelloy C-276), CU5MCuC (Incoloy 825), N7M
(Hastelloy B2), CW6MC (Inconel 625), 7. Aluminum Bronze like 95500, 95600, 9580
Sizes:2” to 72″
Pressure Class150# to 2500#
Ends:RF, RTJ or BWE, (ASME B16.5, MSS-SP-44, B16.47)
Special featuresLow fugitive emissions control,NACE Service either MR-01-75 or MR-01-03,By-Pass, Lantern rings, grease injectors,Damper and Counterweights for Check valves, Chain-wheel, Gear operation, Electric, Pneumatic or Hydraulic Actuation as per Customer
requirements.

 

FORGED STEEL GATE, GLOBE AND CHECK VALVES
Design Standards:API 602
Materail Grades:A105,LF2, LF3, F1, F11, and F22, F5, F5a, F9, F304, F316, F304L, F316L, F51, F55, Inconel, Incoloy, Mone
Sizes:1/4” to 2″
Pressure Class800#, 1500# & 2500#
Ends:FNPT, SWE, RF, RTJ & BWE.
Special featuresT & Y Patterns, Bolted & Welded Bonnet, Low fugitive emissions control,NACE Service either MR-01-75 or MR-01-03.

 

TRUNNION MOUNTED BALL VALVE
Design Standards:API 6D
Materail Grades:A105 or WCB, LF2, LF3 or LCB, LCC, F316, F347 or CF8M, CF8C, F51 or CD3MN, F55 or CD3MWCuN.
Sizes:2” to 60″
Pressure Class150, 300, 600, 900, 1500 & 2500#
Ends:RF, RTJ or BWE, (ASME B16.5, MSS-SP-44, B16.47)
Special featuresBolted Body or Welded Body, Metal to Metal Tungsten Carbide coating, Carbon steel body with Inconel 625 internal cladding, Meets Fire Test in accordance API-6FA, API-607, Full bore or reduce bore available, Double Block and Bleed, Anti-static device, Blow out proof system, NACE Service either MR-01-75 or MR-01-03

 

FLOATING BALL VALVES
Design Standards:API 6D, MSS-72 & API-608
Materail Grades:A105 or WCB, LF2, LF3 or LCB, LCC, F316, F347 or CF8M, CF8C, F51 or CD3MN, F55 or CD3MWCuN.
Sizes:1/2” to 8″
Pressure Class150, 300, 600, 900, 1500 & 2500#
Ends:FNPT, SWE,RF, RTJ or BWE, (ASME B16.5, MSS-SP-44)
Special featuresMeets Fire Test in accordance API-6FA, API-607, Full bore or reduce bore available, Anti-static device, Blow out proof system, NACE Service either MR-01-75 or MR-01-03

 

STEEL LUBRICATED PLUG VALVES
Design Standards:API 6D
Materail Grades:WCA, WCB, WCC, LCB, LCC, WC1, WC5, WC6, WC9, LC2, LC3, 5, C12, C12A, CF8, CF8M, CF8C, CF10, CG8M, CF3, CF3M, CG3M, CN7M (Alloy 20), CN3M (Alloy 20 modifid)
CT15C, CE8MN, CD6MN, CD3MN, Monel M30C, Monel M35-1, Monel CZ100, Inconel, CE3MN, CD3MNWCuN
Sizes:2” to 36″
Pressure Class150, 300, 600, 900, 1500 & 2500#
Ends:RF, RTJ or BWE, (ASME B16.5, MSS-SP-44, B16.47)
Special featuresCompensator Steel Plug Valves (bottom entry) & Lubricated Plug Valves (top entry), Mechanical Balance fiture to avoid jamming of the plug, Hand-wheel, Impact Hand-wheel, Chain-wheel, Gear operation, Electric, Pneumatic or Hydraulic Actuation as per Customer requirements

 

PRESSURE SEAL CAST STEEL VALVES
Design Standards:ASME B16.34
Materail Grades:WCA, WCB, WCC LCB, LCC, WC1, WC5, WC6, WC9, LC2, LC3 C5, C12, C12A, CF8, CF8M, CF8C, CF10, CG8M, CE8MN, CD6MN, CD3MN, Monel M30C, Monel M35-1, Monel CZ100, Inconel CY40
(Inconel 600), CW2M (Hastelloy C4), N12MV (Hastelloy B), CW12MW (Former
Hastelloy C-276), CW6M (New Hastelloy C-276), CU5MCuC (Incoloy 825), N7M
(Hastelloy B2), CW6MC (Inconel 625),
Sizes:2” to 24″
Pressure Class600# to 2500#
Ends:RF, RTJ or BWE, (ASME B16.5, MSS-SP-44, B16.47)
Special featuresPressure Seal valves Gate, Globe, Stop Check, Globe “Y” Pattern, Stop Check “Y”, Flexible wedge or Parallel Slide disc for Gate valve., By-Pass, Lantern rings, grease injectors,Extra deep stuffig box

 

DUO CHECK CAST STEEL VALVES
Design Standards:API 594
Materail Grades:WCA, WCB, WCC LCB, LCC, WC1, WC5, WC6, WC9, LC2, LC3 C5, C12, C12A, CF8, CF8M, CF8C, CF10, CG8M, CE8MN, CD6MN, CD3MN, Monel M30C, Monel M35-1, Monel CZ100, Inconel CY40
(Inconel 600), CW2M (Hastelloy C4), N12MV (Hastelloy B), CW12MW (Former
Hastelloy C-276), CW6M (New Hastelloy C-276), CU5MCuC (Incoloy 825), N7M
(Hastelloy B2), CW6MC (Inconel 625),
Sizes:2” to 36″
Pressure Class150# to 2500#
Ends:Wafer, lugged, Double Flange RF & RTJ
Special featuresCompact body, one-piece wafer design, Spring loaded seat allows for smooth disc closure, preventing premature wear and tear, Dual plates offer maximum strength with minimum opening time, Full contact metal to metal seats maintain positive shut-off at minimum working pressure

 

SLAB GATE VALVES
Design Standards:API 6D
Materail Grades:WCA, WCB, WCC LCB, LCC, WC1, WC5, WC6, WC9, LC2, LC3 C5, C12, C12A, CF8, CF8M, CF8C, CF10, CG8M, CE8MN, CD6MN, CD3MN, Monel M30C, Monel M35-1, Monel CZ100, Inconel CY40
(Inconel 600), CW2M (Hastelloy C4), N12MV (Hastelloy B), CW12MW (Former
Hastelloy C-276), CW6M (New Hastelloy C-276), CU5MCuC (Incoloy 825), N7M
(Hastelloy B2), CW6MC (Inconel 625),
Sizes:2” to 48″
Pressure Class150# to 1500#
Ends:RF, RTJ
Special featuresFull thru-conduit port to permit pass scrapers, pigs and wipers, Top entry for maintenance inline, Double block and bleed.Secondary seal seat grease injectors, Meets Fire Test in accordance API-6FA

 

EXPANDING GATE VALVES
Design Standards:API 6D
Materail Grades:WCA, WCB, WCC LCB, LCC, WC1, WC5, WC6, WC9, LC2, LC3 C5, C12, C12A, CF8, CF8M, CF8C, CF10, CG8M, CE8MN, CD6MN, CD3MN, Monel M30C, Monel M35-1, Monel CZ100, Inconel CY40
(Inconel 600), CW2M (Hastelloy C4), N12MV (Hastelloy B), CW12MW (Former
Hastelloy C-276), CW6M (New Hastelloy C-276), CU5MCuC (Incoloy 825), N7M
(Hastelloy B2), CW6MC (Inconel 625),
Sizes:2” to 48″
Pressure Class150# to 1500#
Ends:RF, RTJ
Special featuresFull thru-conduit port to permit pass scrapers, pigs and wipers, Top entry for maintenance inline, Double block and bleed.Secondary seal seat grease injectors, Meets Fire Test in accordance API-6FA

 

BUTTERFLY VALVES
Design Standards:API 609, AWWA
Materail Grades:A126 CI, WCA, WCB, WCC LCB, LCC, CF8, CF8M, CF8C, CF10, CG8M, CE8MN, CD6MN, CD3MN, 6A. Aluminum Bronze like 95500, 95600, 9580
Sizes:2” to 72″
Pressure Class125# to 300#
Ends:Wafer, Lugged, Doubld Flange RF
Special featuresConcentric, Double & Triple Offset

 

INSTRUMENTATION DBB VALVES
Design Standards:API, MFRS
Materail Grades:A105N, F60, A350, LF2, LF6, A182 F316L, F51, F44, F53, F55, Nickel Al – Bronze, Hastelloy C276, Inconel 625 or 825, Monel K 400 and 500 and Titanium Class 2
Sizes:1/2” to 12″
Pressure Class125# to 2500#
Ends:MONOFLANGE, RF, RF X NPT,
Special featuresINTEGRAL, MODULAR,COMPACT, NEEDLES, MONOFLANGES,MANIFOLDS,